marley
DUAL-DRIVE CLASS-A HEADPHONE AMPLIFIER / PREAMP
REVISION 1.0 – NOVEMBER 2013
Copyright © 2013, M2Tech Srl
9
M2Tech
www.m2tech.biz
1. Unpacking and Placing the Unit
Lay the box on a table and open it by separating it from the external paperwork and
removing or cutting the adhesive tape seal. The following items are included:
•
One
MARLEY
;
•
One wall wart;
•
This manual.
Should one or more item be missing, please contact your dealer.
Remove the
MARLEY
from the foam enclosure and place it onto a stable base, far from
heat sources. Avoid full sunlight on the unit. Allow for ample room around the unit for
venting.
The
MARLEY
is a high bias dual drive class A amplifier which dissipates 30W while
operating, even when idle; therefore a lot of heat is produced. As a result, it is
necessary to guarantee adequate air flow.
Avoid smoke, moisture, dirt and water reaching the unit.
Do not place the unit on thick carpets or inside a box or piece of furniture, not even
close to curtains.
All manuals and user guides at all-guides.com
