M2TECH Marley Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 32

M2TECH Marley Скачать руководство пользователя страница 24

marley
DUAL-DRIVE CLASS-A HEADPHONE AMPLIFIER / PREAMP

REVISION 1.0 – NOVEMBER 2013

Copyright © 2013, M2Tech Srl

24

M2Tech

www.m2tech.biz

VOLUME DISPLAY
DECIBELS

Figure 10

The desired volume display mode is selected by rotating the encoder knob:
“DECIBELS” or “STEPS”.

To confirm the selected volume display mode, push the encoder: the volume display
mode will be set and the unit will revert to “idle” status.

Optionally, if the user changes her/his minds and goes for keeping the volume
display mode previously set, she/he only needs to push the button to the left of the
front panel (Figure 1, 1) or avoid doing any other action on the unit. As a result, after
a few seconds, the

MARLEY

automatically reverts to its “idle” status without changing

the volume display mode.

NOTE: The choice of either mode won’t affect the way volume is actually set:
the

MARLEY

MARLEY

MARLEY

MARLEY

allows for setting volumes between 0 and -78dB with 1dB steps.

Volume display only is changed depending on the choice made as indicated
above.

6.7. Auto Switch-Off Setting

Compliant to UE rules about energy saving, the

MARLEY

is able to automatically switch

off after a certain time of idle operation. Idle means a time lapse in which the user
doesn’t operate the unit’s controls.

All manuals and user guides at all-guides.com

«
...
22
23
24
25
26
...
»

Содержание Marley

































Отзывы:

Нет отзывов