EVO SUPPLY TWO
VERY LOW NOISE DEDICATED POWER SUPPLY
REVISION P
R
A – JULY 2015
Copyright © 2015, M2Tech Srl
17
M2Tech
www.m2tech.biz
6. Overload and Protection
The
EVO SUPPLY TWO
outputs are protected against unwanted overloads by a solid state,
automatically resettable fuse. Anyway, continuous short-circuits may damage the unit and
must always be avoided.
In case of overload or short-circuit at one output, the behaviour of the unit is such that all
outputs are affected.
Whenever an overload condition is detected, it’s recommended that user turns the
EVO
SUPPLY TWO
off and detaches all powered units. Each unit must then be checked with its
stock wall adaptor to find out which unit is defective.
Then working units may be connected back to the
EVO SUPPLY TWO
.
