EVO SUPPLY TWO
VERY LOW NOISE DEDICATED POWER SUPPLY
REVISION P
R
A – JULY 2015
Copyright © 2015, M2Tech Srl
13
M2Tech
www.m2tech.biz
4. Connecting and Powering the Unit
WARNING: All connections between the
EVO SUPPLY TWO
EVO SUPPLY TWO
EVO SUPPLY TWO
EVO SUPPLY TWO
and other equipment must
be made when all units are turned off and completely powered down or unplugged.
Failing to do so may cause damage to the
EVO SUPPLY TWO
EVO SUPPLY TWO
EVO SUPPLY TWO
EVO SUPPLY TWO
and/or other units.
Please refer to chapter 3, “Back Panel”.
Connect up to three units with +9V supply to the
EVO SUPPLY TWO
outputs (Fig. 2, 4), using
the cables provided with the unit, after checking the proper supply voltage for each unit.
WARNING: the rated output current for the
EVO SUPPLY TWO
EVO SUPPLY TWO
EVO SUPPLY TWO
EVO SUPPLY TWO
is 2A.
Connect the provided power cord to the
EVO SUPPLY TWO
power cord socket (Fig. 2, 6), as
well as to a power outlet.
Operate the real panel mains switch (Fig. 2, 5) to power the
EVO SUPPLY TWO
on. The
power on LED (Fig. 1, 1) will glow. The
EVO SUPPLY TWO
will then be in standby, with
outputs disabled and waiting for operation of the output toggle button by the user.
Push the outputs toggle button (Fig. 1, 2). The outputs will enable and the outputs
activation LED (Fig.1, 3) will glow.
