M2M MCF-LW12TERPM, Руководство по эксплуатации

Страница: 12 / 19

m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860
4.1 Activation
The device supports the following activations on a LoRaWAN® network:
1. NONE : sensor not activated
2. OTAA : the JoinEUI and the AppKey not setted, must be written to the device;
3. OTAA MCF88 : Over the air activation, fixed keys: JoinEUI = 904e915000000001, AppKey on
request;
4. OTAA ENGINKO : Over the air activation, fixed keys: JoinEUI = 904e915000000001, AppKey on
request;
5. ABP : requires writing to the device of NwkSkey, AppSkey, DevAddr.
The device exits factory activated with NONE mode. On request devices can be shipped aleady activated.
Note: in OTAA AppKey is write only, in reading the field will always be empty, even if set.
4.2 Other settings
Network settings :
please keep
“Any”
settings. Change it only if Objenious network is used (default_ any).
Network type :
LoRa syncword can be setted as
“private”(0x12)
instead
“public”
(0x34), butthe NS must be setted
accordingly(default: public).
Band :
select the right LoRaWAN ® band settings accodingly to country requirements.