m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860
By using a screw driver push button for 1s as follow, moving right:
Close the plastic case. Switch-on is visible by flashing of red and green leds.
At the first power-on, sensor will take from 1 to 3 minutes to give an effective measure of CO2.
In case of long period inactivity, if necessary, is possible to shut-off again the sensor to prevent battery consumption, via downlink or with LoRa Tool App:
2.4 System leds
LoRaWAN® not configured
Slow flashing
Joining
Sending
Receiving
Steady state
Data error
Connection error
2.5 Battery
This sensor contains lithium battery, which must be disposed of separately.
MCF-LW12CO2E is provided with two Li-SOCl2 battery packs:
Code
Description
MCF-1S4PE 14400mAh battery pack
MCF-1S2PE 7200mAh battery pack
Sensor needs both battery packs, otherwise performance and battery life are not guarantee.
This is the estimated battery life (in
years
) in the worst conditions:
10min reading 15min reading 30min reading
SF12
SF7
2.5.1 Battery replacement
Quick flashing
Quick flashing
Quick flashing
Fixed
Flashing 2 seconds
Flashing 1 second
4,06
6,46
5,08
7,36
6,78
8,55
