m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860
2.3 Power ON/OFF
The sensor is shipped completely off to prevent battery consumption during storage. It is therefore necessary
to carry out a first power-on prior to commissioning.
There are two ways to power on the sensor:
With NFC: Move the NFC antenna of the mobile (the exact position varies depending on the model of
the smartphone) to the sensor antenna, in the area shown in the figure:
•
Mechanical power on:
Open the case using a screw driver as follow:
By using a screw driver push button for 1s as follow, moving right:
