M 2 M C o n t r o l
by Infranet Technologies GmbH
Ph: +49.40.69647-260
Tempowerkring 2
Fax: +49.40.69647-259
21079 Hamburg
Email:
Germany
Web: www.m2mcontrol.de
Technical Manual 1.05, C600 Professional
Page 5 of 24
External connections
Overview
Connections to external equipment are done via the connectors located back and forth on
the product. All connections are available externally for easy access; this also includes
SIM-Card and SD-Card. There are no user-serviceable parts inside and the warranty is
void if the unit is disassembled.
The front plate is equipped with connectors commonly accessed by the user (SIM-Card,
SD-CARD, DIP-Switch, Headset, LED’s and RS232). The back plate holds all connectors
necessary for installation (4-pin for Power and ignition, 6-pin for RS232/Programming, 12-
pin for different serial interfaces and a 16-pin for digital I/O + analog inputs). Connection to
Quad-band GSM antenna is via a SMA Female and connection to a 3V active GPS
antenna is done via the SMB Male connector. Both antenna connectors are located on the
back plate. A graphical overview of the front- and back plate is shown below:
Front-side view
Back-side view
GPS
antenna
GSM
antenna
X4:
Serial Port 1 /
Service port
X1
: Power
System Switch
X3:
I/O
X2:
Communication
9
1
1
3
1
7
1
4
Serial Port 2
LED 1+2
Headset
Connector
Sim Card Reader
Dipswitch
System
LED 1+2
LED 3+4
System
LED 3
SD-CARD Reader
Pin 1
1
