M 2 M C o n t r o l
by Infranet Technologies GmbH
Ph: +49.40.69647-260
Tempowerkring 2
Fax: +49.40.69647-259
21079 Hamburg
Email:
Germany
Web: www.m2mcontrol.de
Technical Manual 1.05, C600 Professional
Page 24 of 24
3. Mount the jumper, as shown on the picture below:
4. Gently push the electronic board back into the encapsulation again. In any case DO
NOT USE FORCE. If difficulty is experienced it is because the light-pipes on the
opposite endplate has moved a bit when the electronic board was removed and it
might be necessary to loosen the front endplate a bit to make them fit in the holes
again.
5. Mount the endplate and secure it with the screws. Be careful not to tighten the
screws too much and thereby damaging the threads.
