M2M ATGMAVL68, Руководство по установке

Страница: 4 / 7

email | support@aampglobal.com
tel | 866-931-8021
6.
STEP 3:
STEP 4:
TESTING THE ATGMAVL68
ADD THE ASSET TO YOUR WEBSITE APPLICATION
After installing the ATGMAVL68, move the asset outside and start the
vehicle. Let it run for five minutes allowing time for the GPS receiver to
receive a good signal from the GPS satellites.
1. Log in to m2mfleetmotion.com
2. Click the settings gear in the upper right corner
Confirming the LED Lights
1.The ATGMAVL68 has LEDs located on the top of the module:
Flash RED at start-up
Flash GREEN when its location is received
2. Log into The M2M website and confirm the vehicle location.
Note: The vehicle must be outside with an unobstructed view of the sky for its
first location to be set in the application.