M2M ATGMAVL68, Руководство по установке

Страница: 3 / 7

email | support@aampglobal.com
tel | 866-931-8021
4.
INSTALLATION GUIDE
ATGMAVL68
STEP 1:
Pin
Location
3
Red/White V2
or Brown/White V1
Output number 2 (-)
6 Black
Chassis ground (-)
7 Red Battery power (+12 Volts)
9 Orange Engine disable command
10 Yellow Output number 1 (-)
Wire
Color
Function Note
STEP 2:
INSTALLATION PREPARATION INSTRUCTION
INSTALLATION
The ATGMAVL68 unit will need to be installed inside of the asset in an
area where it will not get wet or damaged. Mount the module in a
location that has a clear view of the sky with no metal objects between
the device and the sky.
Note: Metallic objects between the GPS unit and the satellites will degrade
the signal and reduce the overall performance.
Main Power
Connect the RED wire to (+) 12 Volt constant power, or directly to the
asset’s battery.
Ignition Wire
Connect the BROWN ignition wire to a power source that has power
when the asset is turned on and running.
If the asset you are installing on does not have an ignition source
available, you can connect the BROWN ignition wire directly to the
vehicle’s battery.
Note: the asset will always report in the application as it is on with no
ignition state updates.
Chassis Ground
Connect the BLACK (-) Input wire to a solid chassis ground uninhibited by
paint or rust; do not use any floating grounds from the vehicle’s electrical
system. Always connect the ground wire directly to the asset’s chassis
and secure the connection with a factory bolt or aftermarket self-tapping
screw.
I/O input and output function
The ATGMAVL68 has two configurable outputs that can be used to trigger
an SPDT automotive relay to trigger items like horns or light flash.
Note: Outputs are low power and require a relay if used; if not it may result in
damage to the device. The output will also need to be set up by M2M in Motion.
1
11
2
12
3
13
4
14
5
15
6
16
7
17
8
18
9
19
10
20
Horn or unlock output
12 volts constant
Normally closed circuit
Door unlock
13 Brown
Ignition power or (+12V input) Switched power