TOPR_OPT_CAM32 Hardware Manual
M
2
I Corporation 8 / 9
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: +82-70-465-3366, Fax: +82-31-465-3355, www.m2i.co.kr
Chapter 7. Maintenance
7.1 Periodic Check Points
Check the followings periodically for best condition of the device.
(1) Environment
a. Is the operating temperature within the allowable range (-10~50°C)?
b. Is the operating humidity within the allowable range (10~80%RH)?
c. Is the Surrounding pollution no corrosive gas?
d. Is the screwed condition normal?
(2) Power
Is the input voltage within the change range (-15%~+10%)?
7.2 Problems with the Device
(1) If there is a problem during operation, stop using it and contact the A/S department of M2I Corporation,
which is indicated on the product label.
(2) Only the authorized worker from M2I Corporation can check and repair problems related to malfunction of
the machine.
(3) If the problem cannot be solved at the installation site, the equipment can be collected and moved toM2I
Corporation.
(4) The manufacturer, M2I Corporation, is not responsible for damage or malfunction of the equipment caused
by the use conditions of the user beyond the installation and use standards described in this manual.
