24
6. Control
Sequence to display MENU
Upon activating the
m
2
as per chapter 6.1, the display will show icon
or
or
or
, depending on the selected mode.
Shortly press the control button (2) on the control unit body (1). The
icon will be displayed; do not press anything now, wait.
After a short moment, a
icon will be displayed – immediately press the control button and successively the following icons will be
displayed in the stated order (see chapter 6.4.1)
. By clicking on one of them, the values
saved in the m2 memory under the selected icon will be displayed. Example:
Shortly press the control button (2) on the control unit body (1). The
icon will be displayed, and next icon
, immediately press
the control button and successively the following icons will be displayed in the stated order
, successively the
following icons will be displayed
(according to chapter 6.4.1 it means that the remaining battery capacity is 99 %)
and then the switched on device will be displayed
. All values are shown only. Non of the values in the menu can be changed.
The GRAVITY index is the maximum falling speed of the last jump in the activation zone expressed in percentage, while 100% is the activation
speed of the device version currently being used. After landing, the skydiver can check how close he got to the activation limit of the device
during the flight on the parachute. This information is important mainly for CP (Canopy Piloting), when parachute pilots reach high speeds in
minimum altitudes above the ground. A decision can be made according to this index, whether the EXPERT version is sufficient for the pilot or,
for example, SPEED is needed. The same absolute falling speed will mean a different GRAVITY index in various versions of the device. 100% is for
m
2
SPEED 45m/s (101 mph); for
m
2
EXPERT and
m
2
TANDEM, 35 m/s (78 mph); for
m
2
STUDENT, 13 m/s (29 mph). Be aware of these differences!
Atmospheric pressure in 0.1 hPa (5 digits = XXXXX) Example: digits 09867 mean pressure 986.7 hPa
6.7.2