8
9
01
I just want to play
this thing...
Power on
Connect the power lead to your 002 then connect the output of the 002 to your mixer, or if
you prefer connect your headphones.
Also connect an ethernet cable from your router to the 002.
In order to maintain a high Signal to Noise Ratio the voices are alternatively split left and right
(eg. 12 voices are split 6 voices on the left and 6 on the right), so we recommend panning the
two channels slightly off centre on your mixer or audio interface.
Before powering up ensure the volume control is at minimum, analogue electronics during
first power on create a ‘pop’ and this may cause damage to your speakers and the sound
guy’s ear drums.
Then power on.
You will see a progress bar on the screen. When the synth has loaded it will change to show
the main patch page.
Press down a key and slowly turn up the volume to a comfortable level.
