background image

2

3

Important Safety Information

WARNING – AS WITH ALL ELECTRICAL PRODUCTS, care and general precautions must be 
observed in order to operate this equipment safely. If you are unsure how to operate this 
apparatus in a safe manner, please seek appropriate advice on its safe use.

Please ensure you read this manual and the Modal 002 ‘Quick Start Guide’ before attempting 
to operate this apparatus

THIS APPARATUS IS HEAVY (approximately 16.5 Kg) – observe lifting and handling precautions 
when moving it. Also ensure that the apparatus is placed on a suitable stand so as to enable 
safe operation and prevent toppling.

This apparatus MUST NOT BE OPERATED NEAR WATER or where there is risk of the apparatus 
coming into contact with sources of water such as sinks, taps, showers or outdoor water 
units, or wet environments such as in the rain. Take care to ensure that no liquids are spilt 
onto or come into contact with the apparatus. In the event this should happen remove power 
from the unit immediately and seek expert assistance.

Be careful to allow free air movement around the apparatus and do not block any air vents or 
exits during operation - this apparatus produces heat.

This apparatus produces sound that could cause permanent damage to hearing. Always 
operate the apparatus at safe listening volumes and ensure you take regular breaks from 
being exposed to sound levels

THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS APPARATUS. It should only be serviced 
by qualified service personnel, specifically when: 

• 

The apparatus has been dropped or damaged in any way or anything has fallen on the 
apparatus

• 

The apparatus has been exposed to liquid whether this has entered the apparatus or not

• 

The power supply cables to the apparatus have been damaged in anyway whatsoever

• 

The apparatus functions in an abnormal manner or appears to operate differently in any 
way whatsoever.

Содержание Modal Electronics 002











































Отзывы: