M Vision CINE 400-3D, Руководство по обслуживанию, Страница: 12 / 82

a). To check the power cable between Power BD and
DMD BD.
b). To check the 30 pins cable between Control BD and
DMD BD.
c). To check the 30 pins connector if the pin broken.
61
OsdLoadError
–
OSD load error. Check and replace the video
board, and then micro control board.
62
ExGpioFail
–
PCF8575 external GPIO communication fail, it
can crash system. Check and replace micro control board, and
then video board.
63
GF9450NoResponse
–
GENNUM SPI communication fail when
system power on. Check and replace the video board.
64
VideoBdInitFail
–
Check and replace the video board.
65
SystemI2CFail
–
System hardware I2C communication fail, it can
crash system. Check the video board, and then micro control
board.
66
EepromFail
–
Check sum of EEPROM error. Check and replace
the micro control board.
67
EdidFail
–
Check sum of EDID error. Check and replace the
micro control board.
68
EEpVersionFail
–
Check version of EEPROM fails. Check and
replace the control board.
69
RstGennum
–
Gennum Reset. Check and replace the video board