1. Specifications
2. Functional Description
1. Heater "ON" lamp : It display output of the Heater.
2. Heater control : It is used for the controlling of the temperature.
3. Stirring "ON" lamp : It display output of the Motor.
4. Stirring control : It is used for the controlling of the Motor RPM.
5. Main power S/W : It is for On/Off of the main power.
3. Operation and control
* HEATER Operation
* MOTOR Operation
* Connect the supplied power cord into connecting holder on rear side
1.Turn s/w No.2 to the right,then Heating runs
1.Turn s/w No.4 to the right,then stirring runs
with lighting on lamp No.1
with lighting on lamp No.3
2.Adjust the heating volume using s/w No.2
2.Adjust the motor volume using s/w No.4
3.To stop the heating, turn s/w No.2 to the left,
3.To stop the stirring, turn s/w No.4 to the left,
then heating stops with lamp No.1 off
then motor stops with lamp No.3 off
※Before using the instrument, read safety precautions carefully, then use this product properly.
※Touching the reactor block surfaces and vials while running, the hot may cause serious burns.
※Do not use the unit on other purpose.
※Avoid contact hot surface. The hot plate will remain hot without any visual indication on power
as well as after power has been removed for sometime .
4. Temperature control
Dimensions
Plate area(mm)
Each 150 x 150
540 x 450 x 125
Electrical supply
AC220-230V 50/60㎐
Heater power
480W x 6
Stirring
Speed
100 ~ 1500rpm
Scale
Up to 1L
Heating & Stirirring Positions
6positions
Temperature
Range
Max. 380℃
Scale
Analog temperature controller
Weight (㎏)
13.5
Heating temperature is controlled by analog temperature controller (Built-in K Type sensor)
Overall(WxDxH)
Top plate
Speed controller
Feedback control
Ceramic coated top plate
Speed display
Capacity(H2O)
Display
Controller
MODEL
Hot plate & Stirrer
HS15-26P
5
1
1
3
2
4
3 Hot plate
5 Hot plate
1 Hot plate
4 Hot plate
6 Hot plate
2 Hot plate
6
1
3
2
4
2
1
3
2
4
