MT-550
11
4.7 Flush Mount Kit Installation
1.
Cut the dash board using a template sheet included in the package.
2.
Set the radio in the cut dash board.
3.
Rotating the longer screw and set it to the hole of the plastic mount block.
Firmly attach the bolt foot rotating to the top of the screw. (See Fig. 1)
4.
Firmly fix the plastic mount block on the either side of the radio using shorter
screw. Don’t forget to attach the washer. (See Fig. 2 and Fig. 3)
5.
Fasten the longer screw to fix the radio to the dash board firmly. (Fig. 4)
The same works should be done to the other side too.
Fig. 1
Plastic mount block
Bolt foot
Fig. 2
Washer
Shorter screw
Fig. 3
(+) screw driver
Fig. 4
Longer Screw
