M-tech MT-500, Руководство пользователя

Страница: 25 / 64

24
MT-500
after each character is selected to enter the character and advance the
cursor to the next character position.
• If using the microphone keys, press the appropriate key repeatedly until
the desired character is displayed at the cursor position. Then press the
appropriate key for the next character. The cursor automatically moves to
the new position. When entering the same character in two or more suc-
cessive character positions, use the
SELECT/ENT
knob or
ENT
keys to
advance the cursor.
• Use the
EXIT
key if necessary to backspace the cursor.
• Up to ten characters are allowed in the name, but only one is required.
Enter enough characters to positively identify the entry.
• After the last character in the name is selected and entered, push the
SELECT/ENT knob or
ENT
key again. The cursor moves to the MMSID
line.
• Push the SELECT/ENT knob or
ENT
key to move the cursor to the first
digit position in the MMSID line.
• Enter the first number in the MMSID. Only numbers 0~9 are allowed in
the MMSID.
• Press the next microphone number key or push the
SELECT/ENT
knob to
store the selected digit and move the cursor to the next digit position.
• Continue to select and store digits until the complete MMSID is entered.
After the last MMSID digit is entered, the cursor returns to the name line of
the display.
• If the name and ID are correct for this directory entry, press and hold the
CALL
key to save the data and exit. The directory list appears in the
display showing the new entry by name only. The MMSID does not
appear in the directory list.
To edit an existing name or MMSID in the directory:
• Press and hold the
CALL
key. The
DIRECTORY
topic appears in the
display.
• Push the SELECT/ENT knob. DSC Calling Directory entries appear in
the display. The directory stores a maximum of 32 entries which are
displayed four at a time.
• Use the SELECT/ENT knob to move the cursor to the entry name for
editing.