20
MTH Centipede Operating Instructions
Remotely Adjusting The Engine Volume
-
Reset Feature 6 – (1
Clank, 1 Clink)
Reset Feature 6 allows you to change the volume setting of the chuff sounds
without affecting the volume of other sounds, such as whistle, bell,
enhanced neutral sounds, etc. To use, cycle to Reset 6 and press the
Whistle button. A single bell will play, and the chuff will begin at the
current volume. Each
time the Whistle button
is pressed, a bell will
sound and the volume
setting will cycle down
to the next level. The
levels available are
100%, 50%, 25%, and
0%. After 0%, pressing
the whistle button again will return the chuff to 100%. When the desired
level is reached, lock the changes by interrupting the throttle and cycling the
engine into forward
Programming For Squeaking Brake Operation-
Reset Feature
45 –(9 Clanks, 0 Clinks)
Reset Feature 45 allows you to determine if and how the Squeaking Brakes
recording will be activated. To use, cycle to Reset 45 and press the Whistle
button. The engine will play a series of bells. This indicates the current
setting. Each time the Whistle is pressed, Proto-Sound® will cycle to the
next available setting and
provide the appropriate
bell indicator. The
settings for Reset 45 are 1
Bell = On Demand
(Enabled when FYS is
activated), 2 Bells =
Always On, 3 Bells = Off.
When the desired setting
is reached, lock the changes by interrupting the throttle and cycling the
engine into forward.
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
6 Times
Listen For 1 Clank
And 1 Clink Sounds
Push The Horn/Whistle Button
Until You Reach The
Setting You Desire
Interrupt The Throttle
To “Lock-In”
The Volume Setting
H
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
45 Times
Listen For 9 Clank
And 0 Clink Sounds
Push The Horn/Whistle Button
Until You Hear The
Appropriate # Of Dings
Interrupt The Throttle
To “Lock-In”
The Brake Setting
H
