FEATURES AND OPERATION
DCS or Digital Control System
While the acronyms are close, this is about where the similarities between DCS
and DCC end. Yes, they are both digital control systems however, M.T.H. DCS
is NOT DCC. There are several proprietary versions of DCC on the market but
friend, this is NOT one of them. M.T.H.'s DCS system is proven technology in
the O and One gauge markets and now, we've brought its power and simplicity it
to you.
First, the power signal in DCS is NOT the command signal. Next, DCS employs
a fully functional bi-directional communication scheme opening a vast range of
advanced features and yet, is so simple and intuitive, you can enjoy them! No
programming tracks, bits and bytes, or conversion of binary to hexadecimal
numbers here! To add an engine in DCS, just press “ADD ENGINE.” After
that, If you want to start your engine, just press “START UP” or, to turn the
sound on or off, just press “SOUND.” No combinations of letters or numbers to
remember! We think you're really going to like this!
Please note, when making setting changes in DCS or DCC, such as address,
please wait a minimum of 5 Seconds after removing power to insure the settings
are stored in the engines memory. Reapplying power in less than 5 Seconds may
result in losing the setting changes.
M.T.H. HO SD70ACe & SD70M-2 Diesel Engine
11
