Set Up Checklist
- Lubricate the locomotive
- Check to see whether the battery needs to be charged for full sound effects
- Prime the smoke unit
- Apply power to run as described in the Basic Operating Section of this manual
Lubrication
You should lubricate the engine to prevent it from squeaking. Use
light household oil and follow the lubrication points marked “L”
shown below. Do not over-oil. Use only a drop or two on each pivot
point.
Checking the Battery
You may find, if your locomotive was built several months before you set it up,
that the rechargeable battery has run down and needs to be charged before
operating. If you notice that the sounds are g arbled, test and charge the engine as
described in the "Self-Charging Battery Back-Up" on page 17.
Premier U30C Diesel Engine with PS-2 and Proto-Scale 3-2
3
DO NOT
OVER OIL
DO NOT
OVER OIL
DO NOT
OVER OIL
Lubrication Points on the Locomotive
Lubrication Points on the Locomotive
Lubricate All Wheel Axles (L)
Lubricate Pick Up Roller Axles (L)
