Maintenance
Lubricating and Greasing Instructions
The engine should be well oiled and greased in order to run properly.
Regularly lubricate all axles and pickup rollers to prevent squeaking. Use light
household oil, such as that found in M.T.H.'s maintenance kit (30-50010). Do not
over oil. Use only a drop or two on each pivot point.
The locomotive’s internal gearing was greased at the factory and should not need
additional grease until after 50 hours of operation or one year, whichever comes
first. Remove the two grease port screws (two per gearbox). Use a grease tube
dispenser and put a small amount (Approx. 1-2 mL.) of lithium-based grease into
each grease port. Replace the screws.
Premier U30C Diesel Engine with PS-2 and Proto-Scale 3-2
13
DO NOT
OVER OIL
DO NOT
OVER OIL
DO NOT
OVER OIL
Lubrication Points on the Locomotive
Grease Port Screw Location
Grease Port Screws
Lubricate All Wheel Axles (L)
Lubricate Pick Up Roller Axles (L)
