18
Premier Burlington Zephyr Diesel Engine
Unplug Connectors
for Interior Lights
Figure 14b. Connectors inside the Observation Car.
Once you have the body mouting screws removed raise the shell off the
chassis enough to see the connectors inside, take note of which connectors are
plugged into which plug. Unplug the connectors to free the shell assembly
from the chassis. See figure 14b.
To access the interior lights you will need to remove the interior from the
shell, to do this you will need to unscrew the two screws hold the interior in
place. See figure14c for the loacations of these screws. Once you have the
interior removed, unplug the connector from the spring contact holder, remove
the wires from the clips and remove the bulb from its holder and replace with
a new one. See figure 14c for a diagram.
Body Mount Screws
Body Mount Screws
Figure 14a. Locations of the Body Mounting Screws.
Remove Interior
Mounting Screws
Slide Bulb out
from holder
Wire Clips
Spring Contact Holders
Figure 14c. Locations of the Observation Car screws and the Bulb locations.
