22
F59PH Operating Manual
Programming PFA Operation-
Reset Feature 28 ( 5 Clanks, 3
Clinks)
Reset Feature 28 allows you to turn the operation of the PFA sequence on
or off. When OFF, the PFA
will not activate. To use,
cycle to Reset Feature 28
and press the Horn/Whistle
button. The engine will
play a series of bells. This
indicates the current setting.
Each time the Horn/Whistle
button is pressed,
Proto-Sound® will cycle to
the next available setting
and provide the appropriate bell indicator. The settings for Reset Feature 28
are 1 Bell = ON, 2 Bells = OFF. When the desired setting is reached, lock
the changes by interrupting the throttle and cycling the engine into forward.
Activating Remote Lock-Out Control-
Reset Feature 40 (8 Clanks,
0 Clinks)
Reset Feature 40 allows you to enable the Reverse Unit Lockout feature of
Proto-Sound®. When enabled, you are able to lock the engine to run in
only one of the directional states (Forward, Neutral or Reverse) whenever
power is applied. The most common use for locking out an engine is in the
use of power blocks on a layout. To use, cycle to Reset Feature 40 and press
the Horn/Whistle button. The engine will play a series of bells. This
indicates the current setting. Each time the Horn/Whistle button is pressed,
Proto-Sound® will cycle to the next available setting and provide the
appropriate bell indicator.
The settings for Reset
Feature 40 are 1 Bell =
OFF, 2 Bells = ON. When
the desired setting is
reached, lock the changes
by interrupting the throttle
and cycling the engine into
forward.
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
28 Times
Listen For 5 Clank
And 3 Clink Sounds
Push The Horn/Whistle Button
Until You Hear
2 Bell Dings
Interrupt The Throttle
To “Lock-In”
The PFA Setting
H
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
40 Times
Listen For 8 Clank
And 0 Clink Sounds
Push The Horn/Whistle Button
Until You Hear
2 Bell Dings
Interrupt The Throttle
To “Lock-In”
The Lock-Out Setting
H
