20
F59PH Operating Manual
to the next level. The levels available are 100%, 50%, 25%, and 0%. After
0%, pressing the horn/whistle button again will return the motor sounds to
100%. When the desired level is reached, lock the changes by interrupting
the throttle and cycling the engine into forward.
Programming For Squeaking Brake Operation
-
Reset Feature
45 (9 Clanks, 0 Clinks)
Reset Feature 45 allows you to determine if and how the Squeaking Brakes
recording will be activated. To use, cycle to Reset Feature 45 and press the
Horn/Whistle button. The engine will play a series of bells. This indicates
the current setting. Each time the Horn/Whistle button is pressed,
Proto-Sound® will cycle to the next available setting and provide the
appropriate bell indicator. The settings for Reset Feature 45 are 1 Bell = On
Demand (Enabled when
PFA is activated), 2 Bells
= Always On, 3 Bells =
Off. When the desired
setting is reached, lock
the changes by
interrupting the throttle
and cycling the engine
into forward.
Programming For Horn In Neutral Operation
-
Reset Feature
25 (5 Clanks)
Reset Feature 25 allows you to operate the Horn while the engine is in the
Neutral state. When ON, pressing the Horn/Whistle button while in
Neutral, with 10V AC or less on the track, will cause the Horn recording to
sound. To use, cycle to Reset 25 and press the Horn/Whistle button. The
engine will play a series of bells. This indicates the current setting. Each
time the Horn/Whistle button is pressed, Proto-Sound® will cycle to the
next available setting and provide the appropriate bell indicator. The
settings for Reset 25 are 1 Bell = OFF, 2 Bells = ON. When the desired
setting is reached, lock the
changes by interrupting the
throttle and cycling the engine
into forward.
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
45 Times
Listen For 9 Clank
And 0 Clink Sounds
Push The Horn/Whistle Button
Until You Hear The
Appropriate # Of Dings
Interrupt The Throttle
To “Lock-In”
The Brake Setting
H
In RESET Mode
Move The Throttle
Up & Down From
High Voltage To Low
25 Times
Listen For 5 Clank
And 0 Clink Sounds
Push The Horn/Whistle Button
Until You Hear
2 Bell Dings
Interrupt The Throttle
To “Lock-In”
The Horn Setting
H
