R9EWTU
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-6224 Rev.9 P. 4 / 21
INSTALLATION
■
WALL MOUNTING
Attach the upper mounting adaptors to the upper side of
the unit, and pull out the lower mounting adaptors from the
lower side. Fasten a M4 screw through the mounting hole
(4.5 mm dia.) of each adaptor. (torque 1.4 N∙m)
To remove the upper mounting adaptor from the unit, pull
it out while squeezing the latches as shown in the figure
below.
push
push
■
DIN RAIL MOUNTING
Set the unit so that the lower mounting adaptors are at the
bottom. Hook the upper hook at the rear side of the unit
onto the DIN rail and push in the lower part of the unit.
When removing the unit, pull out the unit while pushing
down the adaptors using a minus screwdriver.
DIN Rail (35 mm wide)
Mounting Adaptor
TERMINAL CONNECTIONS
Connect the unit as in the diagram below.
■
EXTERNAL DIMENSIONS unit: mm (inch)
6 (.24)
36−M3 SCREW TERMINAL
126 (4.96)
122 (DIN RAIL MOUNT)
115 (4.53)
140 (5.51)
DIN RAIL
35 mm wide
[4 (.16)]
6.5 (.25)
80 (3.15)
75 (2.95)
125 (4.92)
7.3 (.29)
7−M3.5 SCREW TERMINALS
4 − 4.5 (.18) dia. MTG HOLE
