R8-YS2
P. 2 / 4
EM-9745 Rev.1
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
• Protective Cover
The protective cover is to be attached over the connected I/O module
at the right end.
Align the hooks on the cover with the grooves of the module and slide it
straight until the hooks are latched.
Groove
Hook
When removing the cover, pull it out while squeezing the hooks inward.
■
HOW TO UNMOUNT THE MODULE ON DIN RAIL
• Removing an intermediate module
Caution
!
1) Be careful not to hurt your hand by pointed edges of the internal
communication bus connector.
2) I/O modules cannot hold tightly on the DIN rail by themselves without
power/network module.
Secure them to the position if necessary by using DIN rail end plates.
Release the locking clamps and pull out straight the module.