R8-SS4N
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-9728 Rev.2 P. 4 / 5
PC CONFIGURATOR
The following parameter items can be configured with PC Configurator Software (model: R8CFG).
Refer to the users manual of the software for detailed operations.
■
CHANNEL INDIVIDUAL SETTING
PARAMETER
SETTING RANGE
DEFAULT SETTING
Input Range
-20 to +20 (mA DC)
-20 to +20 (mA DC)
Lower range value
-20.00 to +20.00 (mA)
4.00 (mA)
Upper range value
-20.00 to +20.00 (mA)
20.00 (mA)
Fine zero adjustment
-320.00 to +320.00 (%)
0.00 (%)
Fine gain adjustment
-3.2000 to +3.2000
1.0000
Scaled range Zero
-32000 to +32000
0
Scaled range Span
-32000 to +32000
10000
■
CHANNEL BATCH SETTING
PARAMETER
SETTING RANGE
DEFAULT SETTING
Loss of internal bus communication detection time
0.0 to 99.9 (sec.)
1.0 (sec.)
Moving average (ver. 2.00 or later)
Disable/Enable (8 times)
Disable
Configuration mode
DIP switch (OFF),
PC (ON)
DIP switch (OFF)
Note: Turn SW4-8 ON to allow programming by the PC Configurator via the Power/Network Module.
TERMINAL CONNECTIONS
Connect the unit as in the diagram below.
■
EXTERNAL DIMENSIONS unit: mm (inch)
115 (4.53)
6 (.24)
7 (.28)
6 (.24)
7 (.28)
DIN RAIL
(35 mm wide)
[3 (.12)]
[4 (.16)]
12 (.47)
59 (2.32)
55 (2.17)
