MXAB
P. 3 / 4
EM-1747 Rev.6
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
ITEM
MDF.
DATA
CONTENTS
DEFAULT
CODE
21
2
0, 1 – 60
Power-saving mode
0 : Continuous display
10
1 – 60 : Time before display turned off (minutes)
24
2
0, 1
DOWN input logic
0 : True at LOW or Shortcircuit
0 *
2
1 : True at HIGH or Opencircuit
25
2
0, 1
UP input logic
0 : True at LOW or Shortcircuit
0 *
2
1 : True at HIGH or Opencircuit
26
2
0 – 3
STOP input logic
0 : AUTO mode at LOW or Shortcircuit
2 *
2
(Input updating halted at STOP)
1 : AUTO mode at HIGH or Opencircuit
(Input updating halted at STOP)
2 : AUTO mode at LOW or Shortcircuit
3 : AUTO mode at HIGH or Opencircuit
27
2
-1.00 – 1.00
Input code S1
0% input voltage (V) *
3
-1.00
28
2
-1.00 – 1.00
100% input voltage (V) *
3
1.00
27
2
-10.0 – 10.0
Input code S2
0% input voltage (V) *
3
-10.0
28
2
-10.0 – 10.0
100% input voltage (V) *
3
10.0
27
2
-30.0 – 30.0
Input code S3
0% input voltage (V) *
3
-30.0
28
2
-30.0 – 30.0
100% input voltage (V) *
3
30.0
29
2
-1.00 – 1.00
Output code V1
0% output voltage (V) *
4
-1.00
30
2
-1.00 – 1.00
100% output voltage (V) *
4
1.00
29
2
-10.0 – 10.0
Output code V2
0% output voltage (V) *
4
-10.0
30
2
-10.0 – 10.0
100% output voltage (V) *
4
10.0
29
2
0.0 – 20.0
Output code Z1
0% output current (mA) *
4
4.0
30
2
0.0 – 20.0
100% output current (mA) *
4
20.0
31
2
-15.0 – 114.9
Lower output limit
-15.0
32
2
-14.9 – 115.0
Upper output limit
115.0
33
3
0, 1
Reset all settings *
5
0
34
N/A
---
ROM version
---
*1 : Of the range set in ITEM 04/05. ITEM 08 < ITEM 09.
*2 : Use the default setting when combining with the ST/STL.
*3 : ITEM 27 < ITEM 28. *4 : ITEM 29 < ITEM 30.
*5 : Press DATA UP key and choose DATA 1. Double-click DATA DOWN key. The display shows DATA 0 after the initialization is
complete.
■
SELECTING INPUT RANGE
[E.G.] -5.0 to 5.0V DC
1) Program Mode
Set ITEM 01 – DATA 2 to turn the unit into Program
Mode.
2) 0% Input Voltage
Choose ITEM 27 – DATA -5.0.
3) 100% Input Voltage
Choose ITEM 28 – DATA 5.0.
4) Monitor Mode
Set ITEM 01 – DATA 1 to turn the unit into Monitor
Mode.
5) PV Indication
Press ITEM UP or DOWN key until ITEM display indi
-
cates “P”.
■
SELECTING OUTPUT RANGE
[E.G.] -10.0 to 0.0V DC
1) Turn the unit into Program Mode.
2) 0% Output Voltage
Choose ITEM 29 – DATA -10.0.
3) 100% Output Voltage
Choose ITEM 30 – DATA 0.0.
4) Turn the unit into Monitor Mode.
5) Set to ITEM P.
■
DISPLAY RANGE SCALING
[E.G.] PV display range -10.0 to 10.0 modified to show -6500
to 350
1) Turn the unit into Program Mode.
2) Decimal Point Position
Choose ITEM 10 – DATA 0.
3) 0% Scaling Value
Choose ITEM 08 – DATA -6500.
(Negative [–] range is identified with the PL1 turned
on.)
4) 100% Scaling Value
Choose ITEM 09 – DATA 350.
5) Turn the unit into Monitor Mode.
6) Set to ITEM P.
■
RESET ALL SETTINGS
Returning the unit into the factory-default settings.
1)
Turn the unit into Reset Mode. Choose ITEM 01 - DATA 3.
2) Call up the Reset menu.
Choose ITEM 33 – DATA 1. (Press DATA UP key.)
3) Resetting Enable
Double-click DATA DOWN key. DATA 0 is displayed af
-
ter the initialization is complete.
4) Turn the unit into Monitor Mode.
If necessary, go to Moving Average and other adjustments.
Set the unit to Monitor Mode other than for programming.
OPERATION IN DEFAULT SETTING
• When the STOP signal from the computer is ON:
The MXAB tracks the computer input.
• When the STOP signal from the computer is OFF:
The MXAB holds the value just before the OFF signal.
The output signal can be increased or decreased manually
by giving UP or DOWN signals ON. If both UP and DOWN
signals are ON, the output remains held.
