M-system MVW 681 Скачать руководство пользователя страница 17

In this fully integrated appliance the controls are located on the
top of the door. When selecting a programme, the door needs
to be open.

1. Check that the baskets have been 

loaded correctly and that the spray 
arms can rotate freely 

2. Turn on the water tap

3. Press the On/Off button

The indicator lights of the programme selection buttons 
illuminate and in the digital display are visible 2 horizontal 
lines (--).

4. Setting and starting a programme 

a) To select a programme, press indifferently one of the 

two programme selection buttons, the indicator lights of 
the programme selection buttons start to flash and in 
the digital display will appear the number 
corresponding to the last performed washing 
programme. Using these two buttons you have a 
growing (+) or a decreasing (-) order in the selection of 
the programme (see "Washing programmes" chart for 
the number of the programme).

Example:

button 

(growing order): 1

2

3 etc...

button 

(decreasing order): 1

7

6 etc...

If desired, select the options available with the washing 
programme (see "Washing programmes" chart for the 
options available).

b) To select the delay start of the programme, press 

the delay start button, the corresponding indicator light 
will illuminate and in the digital display appears a 
number followed by an (example: 1h).
Press the delay start button until in the digital display 
will appear the number of hours desired (from 1 hour 
up to 19 hours).

The start of the programme or the countdown of the delay 
start will occur only after the closure of the door, until this 
moment you can modify the selection made.
Close the dishwasher door.

a) If delay start has not been set, the programme will 

start automatically.

b) If delay start has been set, the countdown starts 

automatically and will decrease with steps of 1 hour.
The opening of the door will not modify or interrupt the 
countdown. Once the delay start has elapsed the 
programme will start automatically.

5. To interrupt or cancel a washing 

programme in progress

Interrupt or cancel a washing programme in progress 
ONLY if it’s absolutely necessary

Attention! Hot steam may escape when the door is 
opened. Open the door carefully.

Interrupt a washing programme in progress

Open the dishwasher door; the programme will stop. 
Close the door; the programme will start from the point at 
which it was interrupted.

Cancel a washing programme in progress

Open the dishwasher door. 
Press for about 3 seconds the Cancel button, the indicator 
lights of the programme selection buttons will illuminate 
with a fixed light and in the digital display will appear 2 
horizontal lines (--) indicating that the running programme 
has been cancelled and that the machine has returned to 
setting mode. 

(If a new washing programme will be selected, check that 
there is detergent in the detergent dispenser).

6. To cancel a delay start in progress

Open the dishwasher door. 

Press for about 3 seconds the Cancel button, the indicator 
lights of the programme selection buttons will illuminate 
with a fixed light and in the digital display will appear 2 
horizontal lines (--) indicating that the delay start has been 
cancelled and that the machine has returned to setting 
mode. 
Cancelling a delay start involves also the cancelling of the 
set washing programme (and options). 
In this case you have to set the washing programme 
again.

7. End of the washing programme

The dishwasher will automatically stop and an audible 
signal informs you of the end of the washing programme.

Hot steam may escape from the appliance when opening 
the door immediately after the end of the programme, 
therefore, open the door carefully.

The end of programme indicator light is illuminated.

Switch off the dishwasher by pressing the On/Off button.

8. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should 
therefore be allowed to cool down before removing from 
the appliance.
Empty the lower basket first and then the upper one; this 
will avoid water dripping from the upper basket onto the 
dishes in the lower one.
Water may appear on the sides and the door of the 
dishwasher as the stainless steel will eventually become 
cooler than the dishes.

When the washing programme has finished, it is
recommended that the dishwasher is unplugged and the
water tap turned off.

Starting a washing programme

38

Содержание MVW 681
























Отзывы: