The wash results are not satisfactory
Water drops have
dried onto glasses
and dishes
• Increase rinse aid dosage.
• The detergent may be the cause. Contact the detergent manufacturer con-
sumer care line.
If after all these checks, the problem persists,
contact your local Service Force Centre.
Technical data
Dimensions
Width
Height
Depth
59,6 cm
81,8 - 87,8 cm
55,5 cm
Electrical connection - Voltage -
Overall power - Fuse
Information on the electrical connection is given on the rating plate
on the inner edge of the dishwasher door.
Water supply pressure
Minimum
Maximum
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Capacity
12 place settings
Hints for test institutes
Testing in accordance with
EN 60704
must
be carried out with appliance fully loaded and
using the test programme (refer to 'Con-
sumption values').
Test in accordance with
EN 50242
must be
carried out when the salt container and rinse
aid dispenser have been filled with salt and
rinse aid respectively and using the test pro-
gramme (refer to 'Consumption values').
Full load: 12 standard place settings
Amount of detergent required:
5 g + 25 g (Type B)
Rinse aid setting
position 4 (Type III)
Arrangement upper basket
Cup racks: position A
60
