M8XM2 / M8XM3
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax:
+81(6)6659-8510 E-mail: [email protected]
EM-5472 Rev.3 P. 2 / 4
TERMINAL CONNECTIONS
Connect the unit as in the diagram below.
■
EXTERNAL DIMENSIONS unit: mm (inch)
I/O PINS
17.5 (.69)
48 (1.89)
75 (2.95)
83 (3.27)
■
CONNECTION DIAGRAM
+
–
Installation Base
OUTPUT 1
6
7
8
9
10
11
+
–
+
–
OUTPUT 2
1
POWER
CONFIGURATOR
JACK
+
–
2
3
2
1
POTENTIOMETER
max.
4
A
B
C
CHECKING
1) Terminal wiring: Check that all cables are correctly con-
nected according to the connection diagram.
2) DIP switches: Check the output range selector setting.
3) Power input: Check the power input voltage.
4) Input: Check voltage across the terminal B (+) – C (–)
with a voltmeter to show 0 V at the minimum potenti-
ometer input (0 Ω) and the same voltage as that across A
(+) – C (–) at the maximum input.
If the potentiometer wires are broken, the output goes
over 100% (below 0% with downscale protection) due to
burnout function. Confirm the status indicator LED pat-
tern and check leadwires in such a case.
5) Output: Check that the load resistance meets the de-
scribed specifications.
6) Status indicator LED: Check that it blinks in a regular
pattern.
