background image

M3LT

5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: 

+81(6)6659-8510  E-mail: [email protected]

EM-2661-A  P. 1 / 7

THERMOCOUPLE TRANSMITTER

(field- and PC-configurable)

MODEL

M3LT

INSTRUCTION MANUAL

BEFORE USE ....

Thank you for choosing M-System.  Before use, please check 
contents of the package you received as outlined below.
If you have any problems or questions with the product, 
please contact M-System’s Sales Office or representatives.

 

PACKAGE INCLUDES:

Signal conditioner (body + CJC sensor) .........................(1)
I/O range and tag name label sheet ...............................(1)

 

MODEL NO.

Confirm Model No. marking on the product to be exactly 
what you ordered.

 

INSTRUCTION MANUAL

This manual describes necessary points of caution when 
you use this product, including installation, connection and 
basic maintenance procedures. For detailed information, 
refer to the operating manual (EM-2661-B).
The M3LT with Option /A is programmable using the PC 
configurator software. For detailed information on the PC 
configuration, refer to the M3LTCFG instruction manual.  
The M3LTCFG PC Configurator Software and operating 
manual are downloadable at M-System’s web site: http://
www.m-system.co.jp.

POINTS OF CAUTION

 

CONFORMITY WITH UL

• 

This equipment is suitable for use in a Pollution Degree 
2 environment.

• 

DO NOT connect the thermocouple to circuits greater 
than 30V AC rms and 42.4Vpeak or 60V DC.

• 

This equipment is to be used with the maximum operat-
ing voltage 30Vrms and 42.4Vpeak or 60V DC.

• 

The equipment must be mounted inside a suitable fire 
enclosure.

• 

Operating temperature: -25 to +55°C (-13 to +131°F)

 

CONFORMITY WITH EU DIRECTIVES

• 

The equipment must be mounted inside a panel.

• 

Insert noise filters for the power source, input and output 
connected to the unit.  COSEL Model NAC-04-472, TDK 
Model ZCAT 3035-1330 or equivalent is recommended.

• 

Install lightning surge protectors for those wires connect-
ed to remote locations.

• 

The actual installation environments such as panel con-
figurations, connected devices, connected wires, may af-
fect the protection level of this unit when it is integrated 
in a panel system.  The user may have to review the CE 
requirements in regard to the whole system and employ 
additional protective measures to ensure the CE conform-
ity.

 

POWER INPUT RATING & OPERATIONAL RANGE

Locate the power input rating marked on the product and 
confirm its operational range as indicated below:

10 – 32V DC rating: 9 – 36V, approx. 3W

 

SAFETY PRECAUTION

Before you remove the unit or mount it, turn off the power 
supply and input signal for safety.

 

ENVIRONMENT

• 

Indoor use

• 

When heavy dust or metal particles are present in the 
air, install the unit inside proper housing with sufficient 
ventilation.

• 

Do not install the unit where it is subjected to continuous 
vibration.  Do not subject the unit to physical impact.

• 

Environmental temperature must be within -25 to +65°C     
(-13 to +149°F) with relative humidity within 0 to 95% 
RH in order to ensure adequate life span and operation.

• 

Be sure that the ventilation slits are not covered with ca-
bles, etc.

 

WIRING

• 

Do not install cables (power supply, input and output) 
close to noise sources (relay drive cable, high frequency 
line, etc.).

• 

Do not bind these cables together with those in which 
noises are present.  Do not install them in the same duct.

 

AND ....

The unit is designed to function as soon as power is sup-
plied, however, a warm up for 10 minutes is required for sat-
isfying complete performance described in the data sheet.

Содержание M3LT








Отзывы: