M1EXV-4
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-6040-B Rev.2 P. 5 / 37
EXTERNAL VIEWS
Mode Button
Set Button
Display
Configurator Jack
Up Button
Down Button
COMPONENT
FUNCTION
Display
Indicates present values, setting values and abnormal information.
Two types of present values are displayed respectively at the upper and lower parts according to setting.
Mode button
Shifts from Measuring mode to each setting mode.
The destination changes depending on how long the button is held down.
While in each setting mode, pressing Mode button shift to the setting mode for the next channel.
Pressing Mode button for ≥ 2 seconds returns to Measuring mode from each setting mode.
In Measuring mode, shortly pressing the button shifts to the next screen.
Set button
Shifts the setting value of each setting parameter item to a setting changeable state.
When at setting changeable state, used to move through the digits of setting value and to enter (save)
the setting value.
Up button
Shifts through setting parameter items and to increase or select the setting value.
Down button
Shifts through setting parameter items and to decrease or select the setting value.
Configurator Jack
Used to perform configuration with M1E configurator software (model: M1ECFG).
When using the software, set the Lockout setting of the unit to ‘Lock’.
