KDA3
P. 3 / 5
EM-3646 Rev.2
3
4
5
6
2
1
8
7
80 (3.15)
50 (1.97)
103 (4.06)
123 (4.84)
[3.3 (.13)]
80 (3.15)
20
(.79)
35.4 (1.39)
40 (1.57)
50 (1.97)
7.8 (.31)
CLAMP
(top & bottom)
DIN RAIL
35mm wide
2–4.5 (.18) dia.
MTG HOLE
15 (.59) deep
8–M3.5
SCREW
•When mounting, no extra space is needed between units.
16
(.63)
55 (2.17) min.
■
DIMENSIONS mm (inch)
TERMINAL CONNECTIONS
Connect the unit as in the diagram below or refer to the connection diagram label on top of the unit.
26
P
-1.00 – 1.00
ZERO : -1.00
Output code V1
0% output voltage (V) *
5
27
P
-1.00 – 1.00
SPAN : 1.00
100% output voltage (V) *
5
26
P
-10.0 – 10.0
ZERO : -10.00
Output code V2
0% output voltage (V) *
5
27
P
-10.0 – 10.0
SPAN : 10.00
100% output voltage (V) *
5
26
P
0.0 – 24.0
ZERO : 4.00
Output code Z1
0% output current (mA) *
5
27
P
0.0 – 24.0
SPAN : 20.00
100% output current (mA) *
5
28
N/A
–
DA3_VER : *.**
ROM version
*1: Of the range set in ITEM 14/15. ITEM 14 < ITEM 15. Set after ITEM 17 and 18.
*2: Open collector input logic
*3: “Opencircuit” with 24V DC input
*4: “Shortcircuit” with 24V DC input
*5: ITEM 26 < ITEM 27.
Modification Code
D : No modification (writing) possible. Used only for monitoring (reading).
S : Modifiable at any time.
P : Modifiable only when the MAINTENANCE SWITCH is in the “PRG” mode.
ITEM
INPUT DATA
EXAMPLE (DEFAULT)
CONTENTS
MDF.
CODE
LOGIC ITEM 10
0 : Positive logic
1 : Negative logic
INPUT
DATA
0
1
0
1
TTL level, open collector sink type
Short
Open
Open
Short
(TTL level)
(LOW)
(HIGH)
(HIGH)
(LOW)
24V DC, open collector source type
Open
Short
Short
Open