KDA3
P. 2 / 5
EM-3646 Rev.2
FRONT PANEL CONFIGURATION & PROGRAMMING WITH PU-2
❑
• Response Messages
OK: OK
NG: No good. Check modular jack connection.
ER: Communication error
26-pin Connector
(Pin Assignments)
1
2
25
26
Modular Jack
G
ITEM No.
I
(
)
D
Response Messages
Data to be entered
or Messages
LCD Display
MDF.
CODE
ITEM
INPUT DATA
EXAMPLE (DEFAULT)
CONTENTS
01
S
0, 1
MNTSW : MON MODE
Modification code
0 : Data indication only.
1 : All parameters are modifiable.
02
D
STATUS : 0
Status indication
03
D
Output type
DEVICE : 0
0 : V1
DEVICE : 1
1 : V2
DEVICE : 2
2 : Z1
04
P
0 – 99
POWONDELAY : 5
Power ON-delay time (seconds)
10
D
-15.0 – 115.0
%PV : XXX.X
Output indicated in % (as set in ITEM 26/27)
11
P
-99.99 – 99.99
ZERO : 0.00
Zero adjustment (%) (fine adj. of the value set in ITEM 26)
12
P
-99.99 – 99.99
SPAN : 0.00
Span adjustment (%) (fine adj. of the value set in ITEM 27)
13
D
PV : YYYY
Output indicated in engineering unit (as scaled in ITEM 14/15)
14
P
-9999 – 9999
SCALE 0 : -9999
BCD
Scaled range 0% *
1
15
P
-9999 – 9999
SCALE 1000 : 9999
Scaled range 100% *
1
14
P
-7FFF – 7FFF
SCALE 0 : -7FFF
Binary
Scaled range 0% *
1
15
P
-7FFF – 7FFF
SCALE 100 : 7FFF
Scaled range 100% *
1
14
P
0000 – FFFF
SCALE 0 : 0000
Offset binary
Scaled range 0% *
1
15
P
0000 – FFFF
SCALE 100 : FFFF
Reflected binary
Scaled range 100% *
1
14
P
8000 – 7FFF
SCALE 0 : 8000
Two's complement
Scaled range 0% *
1
15
P
8000 – 7FFF
SCALE 100 : 7FFF
Scaled range 100% *
1
17
P
0, 1, 2, 3, 4
CODE : 0
Input code
0 : BCD with polarity (decimal)
1 : Binary with polarity
2 : Offset binary
3 : Two’s complement
4 : Relfected binary
18
P
0, 1, 2, 3, 4
AV1L_BIT : 0
Available number of bits
0: 16 bits 1: 14 bits 2: 12 bits 3: 10 bits 4: 8 bits
19
P
0, 1
POLAR : 1
POL input
0 : Unavailable (not used)
1 : Available (used)
20
P
0, 1
DATA_LOGIC : 1
Data input logic*
2
0 : Positive
1 : Negative
21
P
0, 1, 2
LOAD_LOGIC : 0
LOAD input
0 : LOAD at Low or shortcircuit*
3
1 : LOAD at High or opencircuit*
4
2 : Unavailable (not used)
22
P
0, 1
POLAR_LOGIC : 1
POL input
0 : Negative at High or opencircuit*
4
1 : Negative at Low or shortcircuit*
3
23
P
0, 1, 2
PARITY : 0
Parity check
0 : Disable
1 : Enable Parity per each digit
2 : Enable Parity for all digits
24
P
0, 1
PARITY_TYPE : 0
Odd or even parity
0 : Odd
1 : Even
25
P
0.0 – 60.0
LAG_TIME : 0.0
Delay buffer (seconds, 0 – 90%)
When the Response Time model suffix code is specified to 1, the set
value is only effective at 5.0 or higher value.