manualshive.com logo in svg

M-system JC-IO, Руководство пользователя, Страница: 38 / 41

Поделиться
Скачать
M-system JC-IO Скачать руководство пользователя страница 38

38

JC-IO   USERS MANUAL  EM-9044-B

7.  TROUBLE SHOOTING

7.1  JCIOCFG

PROBLEM FACED

CHECKS TO BE DONE

METHOD OF HANDLING

JCIOCFG does not 
connect to JC-IO via 
COP-US.

Is COP-US Driver installed?

Install the driver software from the CD 
attached to COP-US or download from M-
System's web site.

Is COM port correct?

Select the correct COM port No.
(Refer to 4.3.1 COM Port)

7.2  LED Indication

PROBLEM FACED

CHECKS TO BE DONE

METHOD OF HANDLING

The LED does not 
come on.

Is the JC-IO powered on?

Check the power supply (24 V DC).

The POWER LED is 
blinking.

Is the LAN cable connected to the 
JC-IO?

Connect the LAN cable securely to the 
HUB and router.

Is the JC-IO turned OFF and ON after 
setting IP address to the JC-IO?

Turn OFF and ON the power of the JC-IO.

Is the IP address allocated from the 
router such as DHCP server when 
the JC-IO is in auto IP address setting 
mode?

Confirm the setting of the using router.
(Refer to the users manual of the router.)

The RUN LED is blink-
ing

Is the JC-IO connected to the Modbus 
server and SLMP device registered by 
C (Connection) of JCIOCFG?

Confirm the setting of the master device 
that registered in C (Connection) and the 
system log of the JCIOCFG.
(Refer to 4.5.3 System Log)

Содержание JC-IO










































Отзывы:

Нет отзывов