manualshive.com logo in svg

M-system 73VR21 Series, Руководство пользователя

Поделиться
Скачать
M-system 73VR21 Series Скачать руководство пользователя страница 4

4

73VR21BLD  USERS MANUAL  EM-7395-C Rev.7

1. INTRODUCTION

Thank you for choosing M-System’s Paperless Recorder.

The 73VR21BLD Users Manual will guide you through the software program views and functions.  Please read this 
manual carefully to ensure the safe use before getting started.

The 73VR21BLD will help you easily and smoothly program parameters for the 73VR21x.  It also enables remote 
setup of the 73VR21x through Ethernet.

NOTE

This instruction manual conforms to the 73VR21BLD Version 3.00x or higher.

This software program is compatible with the following 73VR21x versions: 

73VR21x versions

73VR21BLD versions

V1.00.X

V2.00.X

V3.00.X

V3.01.X

or later

V1.00X

Yes

     No

No

No

V2.00X

No

     Yes

No

No

V3.00X, V3.01X, V4.00X, V5.00X, V5.01X, 

No

     No

Yes

No

V5.02X or later 

No

     No

No

Yes

X = Alphabets (A, B, C,...) or Number (01, 02, 03,...)

1.1  GENERAL DESCRIPTIONS

Configuring the 73VR21x:  Storing setting, Display setting, Input pen setting, function pen setting. 

 

 

Downloading a configuration (setup) file created on the 73VR21BLD to the 73VR21x. 

Uploading a configuration file stored in the 73VR21x to the 73VR21BLD. 

 

 

Configuration files can be stored in a storage media such as a hard disk.

Remote operating: 

Starting / stopping the 73VR21x operation remotely.

Creating a data file: 

Creating a data file in a CF Card

Exporting configurations to CSV:  Configuration files created on the 73VR21BLD can be converted into CSV format.

1.2  SYSTEM REQUIREMENTS

The PC environment indicated below is recommended for use with the 73VR21BLD.

OS 

Windows 7 Professional 32-bit or Windows 10 32-bit, 64-bit 

 

 

 

Note: Proper software functions may not be ensured under certain conditions.

Screen area 

1024 by 768 pixels or higher

Display color 

65000 colors (16-bit)

CD drive 

Windows supported CD drive is used to install the software programs.

Card reader 

Used to read/write the CF Card

Mouse 

Windows supported

LAN card 

LAN card required to connect to Ethernet (10BASE-T or 100BASE-TX cable)

1.3  INSTALLATION INSTRUCTIONS

When you insert the CD-ROM (model: 73VRPAC2) into your CD drive, the Flash window will appear, where you are 
prompted to press Enter.  With this, the ‘Welcome to InstallShield Wizard’ will appear.  To proceed with the installa-
tion, press the program’s Install button, and you are prompted to start installation by pressing the Next button suc-
cessively, and finally press Finish to complete the installation.

If you already have the 73VR21BLD program installed on your PC, uninstall (remove) entirely before newly installing.

If the InstallShield Wizard does not appear automatically, please install manually using Add/Remove Programs in 
Control Panel in the following sequence. 

Содержание 73VR21 Series





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды