29
73VR21BLD USERS MANUAL EM-7395-C Rev.7
Figure 3.4. Export setting to CSV.
Basic setting
Input channel
System
Operating mode, Temperature unit, Start mode, Data storing form, Data overwrite, Screen
saver, IP address, Touch panel beep
Data storing method
Storing interval, Storing setting
Display setting
Chart speed, Graph direction, Digital display type, Digital display, Data file used volume,
Display pen number, Display pen number (OV), Auto pen switching, Chart color
Error output
Enable/Disable, Output channel, Contact logic
Hardware configuration
ADC speed, Line noise filter
Pen setting
Input pen setting, Function pen setting, Alarm setting
Display pen select
Select display pens
Comment
Direct input, Group name, Group color, Comment, Auto write in
Choose one or more options and click Output. Specify a file name and save.
3.5 CREATE CF DATA
The 73VR21x automatically creates a data area dedicated to store data files when it starts up. It can also be created
on the PC using the 73VR21BLD. Be sure to create a data file in a CF Card before trying to replace CF Cards while
the 73VR21x is running.
Press Create CF Data and the window shown in Figure 3.5 appears on the screen.
Enter the drive ID where you have a CF Card and press Create. Then the window is replaced with the one shown
in Figure 3.5a.
Pressing Cancel stops creating the file.
The field below the Cancel button shows two figures: file size to be created on the right, file size being created on
the left.
When the operation is complete, ‘Congratulations!’ appears on the screen.
Figure 3.5. Create CF Data.
Figure 3.5a. Create CF Data in file creating process.
Caution !
In order to use the data area created by Create CF Data, insert the CF Card while the power to the 73VR21x is not
supplied.
Total file volume
Created file volume
