MB-RAD
Seite 20
10.
Safety
RAD tools are developed for tightening and loosening threaded fasteners using very high
forces. For your safety and that of others, warning labels and attention labels are
prominently attached to the torque wrench and its accessories.
NOTE:
Make sure you observe the directions on the warning labels at all times.
RAD tools have been designed with safety in mind however, as with all tools you must
observe all general workshop safety practices, and specifically the following:
•
Before using your new tool, get familiar with all its accessories and how they work
•
Always wear safety goggles when the tool is in operation
•
Make sure the reaction arm is in contact with a solid contact point before you
operate the tool
•
Keep your body parts clear of the reaction arm and the contact point
•
Make sure the reaction arm retaining ring is securely in place to hold the reaction
arm or blank in place.
RAD tools are safe and reliable. Not following precautions and instructions outlined here
can result in injury to you and your fellow workers. RAD Torque Systems B.V. is not
responsible for any such injury.
11.
Warranty
11.1.
New tool warranty
Any new tool branded with the RAD name and purchased from RAD Torque Systems B.V., or
through one of its authorized distributors or agents, is warranted to the original purchaser
against defects in materials and workmanship for a period of twelve (12) month from the date of
delivery to the end user. This guarantee is valid until fifteen (15) months after the original
calibration date.
Furthermore, the warranty conditions determine that no warranty applies if:
1. The defect, wholly or partly, is due to unusual, inappropriate, improper or careless use of the
product;
2. The defect, wholly or partly, is due to normal wear and tear or lack of proper maintenance;
3. The defect, wholly or partly, is due to installation, assembly, modification and / or repair by the
customer or by third parties;
4. The product is altered, modified, used or processed;
5. The product is transferred to a third party;
6. RAD Torque Systems B.V. has obtained the product, wholly or partly, from a third party, and
RAD Torque Systems B.V. can not claim compensation under warranty;
7. RAD Torque Systems B.V. in manufacturing of the product raw materials, and suchlike has
used those on the instructions of the customer;
8.
The product has a small deviation in it’s quality, finishing, size, composition and suchlike,
which is not unusual in the industry or if the defect was technically unavoidable;
9. The customer has not fulfilled all obligations under the agreement promptly and correctly
towards RAD Torque Systems B.V..