14
www.m-locks.com
For Example!
User 4 is an active user with code.
• Enter ‘0’ to end the user audit
17
LOCK AUDIT
(ONLY IF 2 OR MORE USERS ARE INSTALLED)
For auditing a lock, entry unit with Dallas reader and Audit Pack for MLS locks are required.
7
Press and hold ‘7’ until a double signal sounds. The LED will illuminate when performing the following
actions:
For example!
9
8
7
6
5
4
• Enter the Manager Code
• Hold the Dallas Key to the Dallas reader till double signal
The audit file has been downloaded to the Dallas Key. The audit gives a chronological list of users that
has opened the lock.
18
REPLACING THE BATTERY
If the lock emits a series of audible tones when opened, the battery is almost exhausted and must be
replaced immediately.
You may
only use 9V ALKALINE Duracell, Duracell Industrial or Energizer alkaline batteries
.
Battery compartment in entry unit
Open the battery compartment and replace the battery by a new one.
Battery compartment inside the safe
In case of keypads starting with ST40xx and DE20xx, the battery compartment is located inside the
safe. If the battery is completely exhausted, hold a fresh battery pressed against the poles on the front
of the keypad, while entering the code, until the lock opens completely.
0
4
