M-LOCKS BV
Tel: +31 (0)314 376 876
Vlijtstraat 40
ver. 1.1 2010 09 21
Fax: +31 (0)314 376 878
NL-7005 BN Doetinchem
1 of 3
www.m-locks.com
Technical manual
Mounting instructions
EC1070
CHARACTERISTICS
The EuroLine series was specially developed for safes using boltworks where the C/C
measurement between lock and boltwork drive is 100mm . It will also work combined with the
DirectDrive lock EM1620 (EM1520). The ABS* housing of the EuroLine Entry unit combines
an alpha-numeric membrane keypad with a large L-handle (metal) and an integrated battery
compartment. The 8x8 mm square shaft of the handle drives either the lock or a boltwork.
Cable length is approximately 30cm.
*Acrylonitrile butadiene styrene, or ABS, (chemical formula (C8H8· C4H6·C3H3N) is a common thermoplastic used to make
rigid, moulded products.
DIMENSIONS/MOUNTING:
The diameter of the cable hole should be minimum 9mm, maximum 12mm. The spindle hole
should be maximum Ø 12mm. Both holes must be de-burred well to avoid damage.
