Page 14 of 24
IU_PulsePRO_05
Download from the keypad directly to a PC:
First activate the “Download extended audit” on the Audit software, then select the
number of events which must be downloaded and press “Download”.
Press and hold
until double beep. LED remains ON.
Enter a Manager code. Double beep.
Press
. LED flashing.
Enter the USB-Dallas device and hold it into the reader. Audit
software starts to download the audit.
When download in progress LED flashing.
When the download is finished LED goes off.
Lock configuration (function 8)
Lock must be open (use a valid code or just press
if in pre-setup mode).
Set the right Configuration number using the tables at the end of this manual (
). A configuration change involves a modification of the time delay which is set to 0
minutes and it restores all the standard codes according to the configuration selected.
Press and hold
until double beep. If in pre-setup mode, please
skip the next two steps. LED remains ON.
Enter a Manager code. LED flashing.
Enter a Master code. LED remains ON.
Enter the number of configuration chosen (
Double beep.
Enter the number of configuration again to confirm. Double beep.
Enter the date format (0 = DD/MM/YY format, 1= MM/DD/YY
format). Double beep and LED flashing.
A double beep means operation done. LED goes off.
Содержание Basic line Series
