M-LOCKS Basic line Series Скачать руководство пользователя страница 19

Страница: 19 / 70

Page 6

IU_

Mini

Tech_03

Change code

Manager (01), users (02-49) and override user (50-59)

Power up the keypad. Press and hold

. LCD will display the

message:

ENTER OLD CODE

X X – X X X X X X

Enter the

old code

and the Dallas key (if set).

Enter the

new code

and the Dallas key (if set).

ENTER NEW CODE

X X X X X X

Confirm the

new code

and the Dallas key (if set).

CONFIRM CODE

X X X X X X

Always perform this operation with the door open.

Users management

Power up the keypad. Press and hold

. LCD will display the

message:

USERS MANAGEMENT

0 1 – X X X X X X

Enter Manager code.

Press

to scroll users list or enter user ID.

02 03 04 05 06

v x _ _ v

“V” user installed, “_” user deleted, “X” user disabled.

Users 02-49 open with time delay (if set). Override user 50-59 opens without time delay. Override
users 50-59 can be only installed when lock is open. Open the lock before install the user.

Press

. If the user is not installed LCD will display the message:

INSTALL?

“ ” code, “ ” Dallas key, “+” dual mode, “TL” time lock

Press

to confirm or press

to disable/enable/delete and press

to confirm.

Lock setup

Lock setup can be performed in two different ways only when the lock is in pre-setup, through a

setup Dallas key or directly through a PC connected to the keypad.

M-LOCKS BV - Vlijtstraat 40 - NL-7005 BN Doetinchem - T +31 (0)314 376 876

[email protected] - www.m-locks.com

Содержание Basic line Series







































































Результаты поиска

Содержание Basic line Series

Отзывы:

Похожие инструкции для Basic line Series

Бренды по названию

Популярные бренды

M-LOCKS Basic line Series, Руководство пользователя

Результаты поиска

Содержание Basic line Series

Отзывы:

Похожие инструкции для Basic line Series

Бренды по названию

Популярные бренды