M-Life ML0657, Руководство пользователя

Страница: 20 / 56

Owner’s manual
20
EN
7.3 Emergency default
If you have lost your PIN code you can still restore your ML0657
to its default settings.
1. Remove and replace the batteries from the handset.
2. Press and hold
while inserting the batteries back in. The
display shows Press
8. ADDITIONAL HANDSETS AND BASES
Up to 5 handsets can be registered and operated from the ML0657
base.
Each handset can be registered with up to 4 bases.
If you buy new handsets to use with your they will have to be
registered to the base before you can use them.
8.1 Register a new handset to your telephone base:
1. At the base: Press and hold for 3 seconds until you hear
two beeps. You now have 90 seconds to register the handset.
2. At the handset: Press , scroll to and press
3. Scroll to and press
4. Enter the base number (1-4). The numbers flashing are already in use.
5. The display will show When the handset finds
the base signal, the and base identification
number is displayed.
6. The display will ask for the PIN to be entered. Enter the PIN (the
default setting:0000) and press to confirm. You will hear a
beep. The handset is now registered.
If the base is not found after a few seconds, the handset returns to
standby. Try registering again. When a handset is registered to a
base, it is automatically assigned a number which is displayed on
the handset and must be used for internal calls.
8.2 If registration does not work:
• Try again selecting a different base number.
• Make sure there is not other electrical equipment very close by