M-E BELL-250 RX, Инструкция по эксплуатации

Страница: 14 / 44

GB
14
ENGLISH
Wireless Doorbell Receiver
Model Bell-250 RX
Thank you for purchasing this wireless doorbell receiver. Please read this
instruction manual carefully and keep it for later use. For information about your
transmitter, please refer to the instructions for the particular device.
This wireless chime receiver with night light function signals ringing bells
acoustically and optically. When ringing, the receiver plays the set melody and
the light field flashes. The optical signalling works independently of the night
light function and cannot be deactivated. The range is up to 100 meters under
optimal conditions. However, the transmission range of the wireless signal will
be reduced if the signal is transmitted through a number of walls or ceilings.
Metal and UPVC doorframes will also reduce the operating range.
KEY
2 = Bell-250 RX (receiver)
19 = Code switch
24 = Nightlight on/off
25 = Light field
27 = Light intensity sensor
POWER SUPPLY
The receiver is operated directly with 230V mains voltage. Simply plug the
receiver into an easily accessible power outlet.
NOTE: After the battery is replaced in the transmitter, all receivers must be
coded again. In addition, the receiver must be re-coded when it has been
disconnected from the wall socket or after
a power failure.
BELL-250 RX