M Design Luna Diamond Series, Инструкция по установке и эксплуатации

Страница: 24 / 36

24
9. First-time user
The masonry and plaster surrounding a recently installed appliance holds a great deal of
moisture, which must first evaporate before commissioning the appliance. If not, the
plaster may crack or split. Ask your installer about the timescale to follow. The first time
you use it, only make a moderate-sized fire.
The first few times the appliance is used, an unpleasant odour may be apparent.
It comes from the protective paintwork. These emissions are totally harmless. To quickly
get rid of these odours, all you need to do is ventilate the room for a while.
After the first few fires, a light deposit may appear on the window. It comes from the
paintwork. Once the appliance is cold you can get rid of this deposit by using M Design’s
Bio-Clean cleaning product. This product may be used later on for cleaning the window.
The appliance must not be used if the door no longer has a window or with the door open.
If the window is broken or cracked, the appliance must not be used until the window has
been replaced. Contact your M Design reseller.
10. Safety, device and maintenance
Have your appliance inspected every 2 years by a qualified technician.
Please observe the following points:
•Closed appliances produce intense heat, which means that all the surfaces of the external
walls (metal, door frames and windows) become very hot once a certain tempera-ture is
reached. Make sure that young children do not touch the window; this could result in severe
burns.
•The logs, ceramic pebbles, a Diamond set and a Sapphire set are delivered with the
appliance.
Never put other objects in the flames!
•Check that there is nothing on the ignition pin and that the imitation coal does not lie on
the small openings of the burner. When starting up, make sure you see the ignition sparks.
• If after 2 attempts the device does not start up, wait 15 minutes before
restarting, or open the window to attempt to start up. If this does not work,
please contact the dealer and not try to get the device started.
•Keep inflammable materials a suitable distance from the appliance (min. 1m)!
•Never modify the settings yourself! The furnace warranty will then be considered as
invalid, null and void.
•Never let children use the remote control without supervision.
•If the burner goes out for any reason, wait at least three minutes before lighting the
appliance again. Open the window to vent the fireplace.