M-Audio Trigger Finger Pro, Руководство пользователя

Страница: 92 / 97

92
Pads
The Preferences also let you can set the gain, sensitivity, and velocity curves used for all of
Trigger Finger Pro's pads.
To adjust the pad settings:
1. Enter Preferences by pressing the third Function Button (Prefs) while in Performance
Mode.
2. Press the third Function Button (More) .
3. Turn the third Assignable Knob (Pads: Gain) to set the pads' gain ( 01 – 10 ), which affects
the range of force required to trigger notes across the available range of velocities. At
high values, there is not much of a difference in how much force you need to trigger a
low-velocity hit compared to a high-velocity hit. This works in conjunction with the
velocity curve (see below). The default gain is
05 .
Turn the fourth Assignable Knob (Pads: Sens) to set the pads' sensitivity ( 01 – 16 ), which
affects how much force is required to trigger a pad (i.e., the threshold). At lower values,
more force is required to trigger the pad. The opposite is true for higher values. The
default sensitivity is
16 .
Press the first Function Button (Pads: Curve) to set the pads' velocity curve type, which
affects the pads' response at different velocities:
•
Log1: A logarithmic curve: quickly rising in the beginning and flattening at the end.
This results in it being easier to generate higher-velocity hits with less force.
•
Log2: An alternative logarithmic curve.
•
Linear: A straight line from beginning to end. This results in a precisely proportional
velocity response.
•
Exp1: An exponential curve: slowly rising in the beginning but increasing steepness
at the end. This results in it being easier to generate lower-velocity hits, limiting the
occurrence of high-velocity hits to instances where you apply a
lot of force.
•
Exp2: An alternative exponential curve.
4. Make other changes to your Preferences, or exit Preferences by pressing the fourth
Function Button (Exit) or another mode button. 