M-Audio Studiophile SP-8S, Руководство пользователя

Страница: 13 / 14

Technical Specs
SP-8S Specs:
• Type: Bass-reflex powered subwoofer
• Woofer Driver : 8-inch mineral-filled polypropylene cone with high-temperature
voice coil and damped rubber surround
• Frequency Response : 30Hz – 180 Hz
• Low-Pass Filter : Butterworth –12dB/octave <325Hz, -24dB/octave > 325Hz
• Crossover Frequency: Adjustable 50Hz - 180Hz
• Input Sensitivity: 89dB
• Amplifier Power: 100W @100Hz, 4 ohm, 0.1% THD
• Dynamic Power: 120W
• S/N Ratio: > 100dB below full output, 100Hz
• Input Connectors: Two XLR balanced inputs; two TRS balanced/ unbalanced inputs
• Output Connectors: Two XLR balanced outputs for satellites, one XLR
balanced output for additional subwoofer
• Controls: Level; Phase; Subwoofer Frequency; Satellite Frequency
• Switches: Auto on/off; Satellite high-pass output bypass
• Input Impedance: 20k ohms balanced, 10k ohms unbalanced
• Input Sensitivity: 150mV input produces full output with volume control at
maximum
• Protection: Over temperature, turn-on/off transient, subsonic filter, external
mains fuse, ALC (avoid from hard clipping)
• Indicator: Power On (green) or Stand-by/Protection (Amber)
• Power Requirements: Dual-voltage (selectable by rear-panel switch) for either
115V/~60Hz, 230V/~50Hz; powered via detachable 3-circuit line cord
• Cabinet: Vinyl-laminated MDF
• Dimension: 15.6 in. (h) x 10.63 in. (w) x 12 in. (d)
• Shipping Weight: 36 lbs.
Remarks: Above specifications are subject to change without notice.
13